Metadata-Version: 1.1
Name: libsensorPy
Version: 0.0.3
Summary: An extendable python library to manipulate sensors coupled to the Raspberry Pi
Home-page: https://github.com/juniorug/libsensorPy
Author: Junior Mascarenhas
Author-email: juniorug@gmail.com
License: BSD
Description: LibsensorPy
        An extendable python library to manipulate sensors coupled to the Raspberry Pi
        
        WHAT IS NEEDED BEFORE INSTALL?
        
        1) Configure and enable SPI and I2C ports on raspperry:
        
        $ sudo apt-get install python-smbus
        $ sudo apt-get install i2c-tools
        2.1) For Raspbian users, check /etc/modprobe.d/raspi-blacklist.conf and comment "blacklist i2c-bcm2708" and "blacklist spi-bcm2708" by running
        
        $ sudo nano /etc/modprobe.d/raspi-blacklist.conf
        and adding a # (if its not there).
        
        # blacklist i2c-bcm2708
        
        # blacklist spi-bcm2708
        
        2.2) For Wheezy or something-other-than-Occidentalis, add the following lines to /etc/modules:
        
        i2c-dev
        i2c-bcm2708
        spi-bcm2708
        and then reboot.
        
        3) Install pigpio:
        
        $ wget abyz.co.uk/rpi/pigpio/pigpio.zip
        $ unzip pigpio.zip
        $ cd PIGPIO
        $ sudo make
        $ sudo make install
        
        4) Install setuptools:
        
        sudo apt-get install python-setuptools
        
        How to download and install LibsensorPy:
        
        $ wget https://pypi.python.org/packages/source/l/libsensorPy/libsensorPy-0.0.1.tar.gz
        $ tar -zxvf libsensorPy-0.0.1.tar.gz
        $ cd libsensorPy-0.0.1/
        $ sudo python setup.py install
        
Keywords: example documentation tutorial
Platform: UNKNOWN
Classifier: Development Status :: 3 - Alpha
Classifier: Topic :: Utilities
Classifier: License :: OSI Approved :: BSD License
